• How to configure a public screen
• Driver: DisplayLink USB Graphics Software for Windows 9.3 M1.exe (or get it from https://www.displaylink.com/downloads/windows)

This page is underconstruction

Ticket printer BOCA

What are the components you need ?

USB cable

Image Removed

Power supply cable (CH cable)

Image Removed

USB Hub

Image Removed

How to plug ?

1) USB CABLE

Plug USB cable to HUB USB

Image Removed

Plug the other end of this cable to the BOCA

Image Removed

2) POWER SUPPLY CABLE

Plug the power supply cable to the BOCA and in eletrical slot

Image Removed

Switch on the button power

Image Removed

How to configure on the device ?

 1 )Windows

When you have connected the printer, this one is automatically find by Windows, your printer is ready

Image Removed

Open the configuration printers, enter "printers"

Image Removed

Image Removed

Click on the printer and Manage

Image Removed

Identify your printer (If the name contents BIDI, you have the new version of the drivers)

If this case we should follow the futur steps

Image Removed

Click on printer properties

Image Removed

Click on "Ports" and uncheck "Enable bidirectional support"

This step is very important, if this case is checked it could cause some issues with Secutix

2) SecuTix

Image Removed

Logon to Secutix

Image Removed

Click on "Workstations" (menu Organisation parameters > Initialisation)

Image Removed

Fill in "Name" and "Code" and click on "DETECT DESK"

Image Removed

Click on the drive to save the configuration

Image Removed

Click on "Hardware"

Image Removed

Click on "Hardware" and "New"

Image Removed

Fill in the fields, and click on "Next"

Image Removed

Fill in the fields, and click on "Next"

Image Removed

Save and close

Image Removed

Your printer is now active in Secutix

Image Removed

Image Removed

Image Removed

Image Removed

Image Removed

3) Paper insertion

Image Removed

You can insert the paper, the black mark should be at the bottom on the right

When it is ok, the printer would move forward on the length of a ticket, and go back.

This operation uses to measure the size of the note, if the paper continues to advance the black mark has not detected, and the paper may be in the wrong direction.

Multi-Touch ELO

What are the components you need ?

USB cable

Image Removed

Power supply cable (CH cable)

Image Removed

How to plug ?

-

How to configure on the device ?

No needed to Re-Align the screen

How to configure in Windows ?

Download the driver of the screen : http://support.elotouch.com/download/Drivers/DriverDownload/default.aspx 

Double click on EloSetup.exe
Accept the installation agreement and proceed with the installation process.

Once installation is complete, both USB and PulseTouch drivers will be installed

Image Removed

You should uncheck theses box to disable the sound from the screen.

How to configure in SecuTix ?

No configuration needed

EPSON TM-T88V

...