Page History

Versions Compared

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

What are the components needed?

Stimare printer


Image Modified


Power plug


Image Modified

USB Cable Type B


Image Modified

Thermal Ticket


Image Modified

  • Plug in the power plug with the printer
  • Correctly insert Stimare-compatible THERMAL ticket paper into the printer
    • Wait until the printer scans through the paper and detects the position of the black bar. If the paper is correctly injected, the indicator light will turn green.
  • Connect the printer with your PC or laptop via the USB Type B cable
  • Done!

How to set it up in SecuTix?

Info
titlePrerequisite
  1. Printing with Stimare printer is only supported if you activate Device Manager mode on your workstation (Refer to Step 5 & Step 10 below).
  2. Make sure there's already a Stimare THERMAL ticket template configured in your SecuTix backoffice and the size of the template reflects the true size of the paper.
  3. Make sure the Stimare printer parameters (e.g. Emulation mode) are correctly configured on the printer and match with the THERMAL ticket template.
  4. Printing with Stimare printer is only supported if you activate Device Manager mode on your workstation (Refer to Step 5 & Step 10 below).
  5. Note down the ticket model(s) used by the product(s) which you want to print THERMAL tickets for in the Box Office sales channel.

...